Specifications Summary
Memory
SD Slot: SDXC.
Input/Output Interface
Digital Input Channels: 2.
Digital Inputs: +13 to +30 V for state 1, -30 to +1 V for state 0, Max. input current: 8 mA.
Relay Channels: 2.
Contact Current Rating: Resistive load: 1 A @ 24 VDC.
Connector: Terminal block.
Ethernet Interface
10/100BaseT(X) Ports: 2 (RJ45 connector).
Ethernet Software Features
Protocols: TCP/IP, IPv4/IPv6, UDP, HTTP, RTP/RTSP, ARP, UPnP, FTP, TFTP, NTP Client, DNS, QoS, IGMP v3, ICMP, SNMPv1/v2c/v3, Modbus TCP, HTTPS, 802.1X, NTCIP.
Security Functions
Password: User-level password protection.
Filter: IP address.
Authentication: 802.1X.
Encryption: HTTPS, SSH.
LED Interface
LED Indicators: STAT: Indicates system status, Power 1/2: Indicates power on/off, FAULT: Configurable for alarms/power/network, Video: Video input signal, PTZ: PTZ/COM port data, SD: SD card mount status, Network: 10/100 Mbps.
Serial Interface
PTZ Port: 1, RS-232 or RS-422/485 (terminal block, 115.2 kbps).
COM Port: 1, RS-232 or RS-485 (DB9 male, 115.2 kbps).
Console Port: 1 RS-232 port (10-pin RJ45, 115200, n, 8, 1).
Power Parameters
No. of Power Inputs: 2.
Input Voltage: Redundant dual inputs, 12 to 32 VDC, 18 to 30 VAC.
Input Current: 0.64 A @ 12 VDC, 0.18 A @ 32 VDC; 0.59 A @ 18 VAC, 0.35 A @ 30 VAC.
Power Connector: 2-pin terminal block.
Video Interface
Video Compression: H.264 (ISO/IEC 14496-10) or MJPEG.
Video Input: 1, BNC connector (1.0 Vpp, 75 ohm).
Video Output: via Ethernet.
Video Streams: 4 independent H.264 or MJPEG streams.
Video Resolution: Adjustable size and quality, Timestamp, OSD position.
Video Viewing: DynaStream™ for automatic frame rate changes, CBR Pro™ for quality in limited bandwidth.
Audio Interface
Audio Inputs: 1 Line-in/MIC-in (3.5 mm jack).
Audio Outputs: 1 Line-out (3.5 mm jack).
Audio Format: Mono, PCM (G.711).
Camera Software Development
Video Standards: ONVIF Profile S.
Camera PAN/TILT/ZOOM
PTZ Camera Control: Via PTZ or COM port.
PTZ Functions: Pan, tilt, zoom, focus, move speed, preset positions (max. 128).
Protocols: Pelco D, Pelco P, Custom Camera.
Camera Alarm Software Features
Intelligent Video: Camera tampering detection.
Video Motion Detection: 3 configurable areas.
Scheduling: Daily repeat timing schedule.
Imaging: JPEG snapshots for pre/trigger/post alarms.
Custom Alarms: HTTP event servers for alarm actions.
FTP Messaging: Event-triggered image transfers via FTP.
Pre-Alarm Buffer: 50 MB video buffer for JPEG snapshots.
Video Recording: Event recordings stored on SD card.
Software Requirements
Memory Size: 1 GB.
Operating System: Windows 7 or above.
Browser: Internet Explorer 9.x or above.
Multimedia: DirectX 9.0C or above.
Physical Characteristics
Housing: Metal.
Dimensions: 46 x 134 x 105 mm (1.81 x 5.31 x 4.13 in).
Weight: 710 g (1.57 lb).
Installation: DIN-rail or wall mounting (optional kit).
Environmental Limits
Operating Temperature: -25 to 60°C (-13 to 140°F) for standard models, -40 to 75°C (-40 to 167°F) for wide temp models.
Storage Temperature: -40 to 85°C (-40 to 185°F).
Ambient Relative Humidity: 5 to 95% (non-condensing).
Altitude: 2000 m.
Standards and Certifications
EMI: CISPR 32, FCC Part 15B Class A.
EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV, IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8 PFMF.
Freefall: IEC 60068-2-31.
Safety: UL 60950-1.
Shock: IEC 60068-2-27.
Vibration: IEC 60068-2-6.
MTBF
Time: 862,568 hrs.
Standards: Telcordia SR332.
Warranty
Warranty Period: 5 years.
Details: See Moxa Warranty.
