ETH to FIBER: Interface
10/100Mb RJ45 (Megabit) Ports: Yes (1 Port)
10/100/1000Mb RJ45 (Gigabit) Ports: No
100Mb Fiber optic multi mode (Megabit) Ports: No
100Mb Fiber optic single mode (Megabit) Ports: No
1000Mb SFP Fiber optic (Gigabit) Ports: No
M12 port: No
Alert Output: No
ETH to FIBER: Standards and protocols
Protocols and work standards: -
eth to fiber: General
Maximum cable length for data transfer: 5Km with multi mode fiber optic cable
MTBF: 1,579,447 hrs
ETH to FIBER: Power Requirements
Power consumed: 185 mA @ 12 VDC
Type of power input: -
POE Support: No
Protection against overflow: No
ETH to FIBER: LED Indicators
LNK/ACT: No
ETH to FIBER: Buttons
DIP Switch: No
ETH to FIBER: Physical Characteristics
Standards and Certifications: EMC: EN 55032/35; EMI: CISPR 32, FCC Part 15B Class A; EMS: IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m, IEC 61000-4-4 EFT: Power: 1 kV; Signal: 0.5 kV, IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m, IEC 61000-4-8 PFMF: 30 A/m; Environmental Testing: IEC 60068-2-1, IEC 60068-2-14, IEC 60068-2-2, IEC 60068-2-3; Vibration: IEC 60068-2-6
Housing: -
Dimensions: 86.8 x 124.3 x 21 mm (3.42 x 4.89 x 0.83 in)
Weight: 140 g (0.31 lb)
Operating Temperature: 0 to 55°C (32 to 131°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Operation Humidity: 5 to 95% (non-condensing)
Installation: can be installed in any NRack System™ chassis
