• Moxa-MGate-5134-T-ManuAuto
1 1

Moxa

MOXA MGATE 5134-T MODBUS RTU/ASCII/TCP TO PROFINET GATEWAY

MOXA MGATE 5134-T MODBUS RTU/ASCII/TCP TO PROFINET GATEWAY

$1,034.00 CAD
$1,034.00 CAD
Sale Sold out

Features and Benefits

  • Protocol conversion from Modbus to PROFINET
  •  Supports PROFINET IO device
  •  Supports Modbus RTU/ASCII/TCP client
  •  Flexible deployment with Ethernet cascading and dual subnet
  •  Embedded traffic monitoring/diagnostic information for easy troubleshooting
  •  Easy device configuration via a web-based console
  •  microSD card for configuration backup/duplication
  •  Supports dual redundant DC power inputs and 1 relay output
  •  Serial port with 2 kV isolation protection
  •  -40 to 75°C wide operating temperature
  •  Developed according to IEC 62443-4-2 with Secure Boot
View full details

Description

Introduction

The MGate 5134 is an industrial Ethernet gateway for converting Modbus RTU/ASCII/TCP to PROFINET network communications. To integrate existing Modbus devices onto a PROFINET network, use the MGate 5134 as a Modbus client to collect data and exchange data with the PROFINET host. All models are protected by a rugged and compact metal housing, are DIN-rail mountable, and offer built-in serial isolation. The rugged design is suitable for industrial applications such as factory automation, power, oil and gas, water and wastewater, and other process automation industries.

Easy Configuration

The MGate 5134 gateways are provided with a web console to make configuration easy without having to install an extra utility. In addition, HTTPS encryption of communication ensures higher network security. In most data-acquisition applications, configuration of devices with Modbus commands can be time-consuming and increase costs. The MGate 5134 gateways provide offline configuration via a CSV file to help complete the Modbus settings quickly. The gateways also come with a GSDML export function to enable export of these files so that they can be imported to PROFINET PLCs. The MGate gateways provide software-configurable pull high/low and termination resistor settings for RS-485 2-wire to reduce efforts by eliminating the need to open the chassis.

Easy Troubleshooting

The MGate 5134 gateways provide a variety of maintenance functions to reduce troubleshooting time and cost, including LED indicators, protocol diagnostics, traffic monitor, and tag view. These tools help you capture and check data to easily identify the root cause of issues, especially during the installation stage. The MGate gateways also come with status monitoring and fault protection functions. The status monitoring function notifies a PLC/DCS/SCADA system when a Modbus device gets disconnected or does not respond, in which case the process PLC/DCS gets the status of each end device and then issues alarms to notify operators. The fault protection function executes actions pre-defined by the user when a host gets disconnected to prevent the end devices from going offline for long periods of time..

Data sheet

Specification

Number of Ports: 2
Speed: 10/100BaseT(X) Ports (RJ45 connector) Auto MDI/MDI-X connection
Connector: RJ45 connector
Magnetic Isolation Protection: 1.5 kV (built-in)
Modbus TCP: Mode: Client, Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23, Max. No. of Server Connections: 32, Max. No. of Commands: 128, Total Input & Output Data Size: 2048 bytes
Profinet Mode: IO Device class B
Max. No. of Master Connections: 2 IO Controllers (shared devices)
Input/Output Data Size: 1440 bytes per IO Controller (total: 2880 bytes)
Protocol: Modbus RTU/ASCII Client, Functions Supported: 1, 2, 3, 4, 5, 6, 15, 16, 23, Max. No. of Server Connections: 31, Max. No. of Commands: 128 per serial port
RS-232 Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Signals: Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Signals: Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Signals: Data+, Data-, GND
RS-485 Data Direction Control: ADDC (automatic data direction control)
Serial Standards: RS-232/422/485
Connectors: DB9 male
Pull High/Low Resistor for RS-485: 1 kilo-ohm, 150 kilo-ohms
Terminator for RS-485: 120 ohms
Isolation: 2 kV (built-in)
Data Bits: 7, 8
Stop Bits: 1, 2
Parity: Even, Odd, Space, Mark, None
Flow Control: RTS Toggle (RS-232 only), RTS/CTS
Baudrate: 300 bps to 921.6 kbps
Configuration Options: Web Console (HTTPS), Device Search Utility (DSU)
Utility: -
Support: -
MTBF: 1,240,821 hrs
Input Current: 455 mA (max): 12 to 48 VDC
Input Voltage: 12 to 48 VDC
Power Connector: Spring-type Euroblock terminal
Dimensions: 25 x 90 x 129.6 mm (0.98 x 3.54 x 5.1 in)
Housing: Metal
IP Rating: IP30
Operating Temperature: -40 to 75°C (-40 to 167°F)
Weight: 294 g (0.65 lb)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Vibration: IEC 60068-2-6, IEC 60068-2-64
Shock: IEC 60068-2-27
Drop: IEC 60068-2-31
Safety: EN 61010-2-201, UL 61010-2-201
Hazardous Location: -
EMC: EN 61000-6-2/-6-4
EMI: FCC Part 15B Class A
EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m IEC 61000-4-8 PFMF