Industrial Computer: Computer
CPU: Intel Atom® Processor E3826 (1M Cache, 1.46 GHz)
System Memory: 1 DDR3L SO-DIMM slot, 4 GB pre-installed, supports up to 8 GB
USB: USB 2.0 hosts x 2, Type A connectors
Storage: CFast: 1 CFast socket for OS storage; CFast supports 16 GB, 32 GB, 64 GB, and 128 GB, SD: 1 SD 3.0 (SDHC/SDXC) socket for storage expansion; SD supports 16 GB, 32 GB, 64 GB, and 128 GB (only for the MC-1111 and MC-1121 series)
Industrial Computer: Interface
LAN: 2 auto-sensing 10/100/1000 Mbps ports (RJ45)
Magnetic Isolation Protection: 1.5 kV built-in
Serial Standards: -
Industrial Computer: Display
Graphics Controller: Intel® HD Graphics 4000
Display Interface: VGA interface x 1: 15-pin D-Sub connector (female), with resolution up to 1920 x 1200 pixels at 75 Hz, Display port interface x 1: Display port connector, with resolution up to 2560 x 1600 pixels at 60 Hz (only for the MC-1111 and MC-1121 series)
Industrial Computer: Compatible Operating Systems
Operating System: Supports Windows 10 IoT, 64-bit Windows 7 Embedded, and Linux Debian 8
Industrial Computer: Digital Input
Input Channels: DI x 4 (non-isolation)
Input Voltage: Logic level 0: Close to GND, Logic level 1: Open
Industrial Computer: Digital Output
Output Channels: DO x 4 (Non-Isolation)
Output Voltage: Logic level 0: 0 to 0.55 V, Logic level 1: 5 VDC (4.7 to 5 V)
Output Clamping Current: 24 mA
Industrial Computer: Serial Communication Parameters
Data Bits: 5, 6, 7, 8
Stop Bits: 1, 1.5, 2
Parity: Even, Odd, Space, Mark, None
Flow Control: RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate: 50 bps to 115.2 kbps
Industrial Computer: Serial Signals
RS-232: TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422: TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w: TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w: Data+, Data-, GND
Industrial Computer: LED Indicators
System: Power
LAN: 2 LEDs per port (100/1000 Mbps)
Serial: 2 LEDs per port (Tx and Rx)
Storage Device: CFast, SD
Industrial Computer: Power Requirements
Input Voltage: 12/24 VDC typical (11.4 to 36 VDC tolerance, 2-pin terminal block) (DNV: 24 VDC)
Power Consumption: Less than 30 W
Industrial Computer: General
Automatic Reboot Trigger: Built-in watchdog timer (WDT), configurable for resets following 1-255 second hang intervals; software programmable
Industrial Computer: Physical Characteristics
Dimensions: 132 x 122 x 87 mm (5.20 x 4.81 x 3.43 in)
Housing: Aluminum, sheet metal
Operating Temperature: -40 to 70°C (-40 to 158°F) (DNV: -25 to 70°C)
Storage Temperature: -45 to 75°C (-49 to 167°F)
Relative Humidity: 5 to 95% (non-condensing)
EMC: EN 55032, EN 55024
Weight: 1.75 g (3.86 lb)
Anti-Vibration: 0.7 g @ DNV GL (Class A), sine wave, 2-100 Hz, 1 Oct./min., 1.5 hr per axis, 1 g @ DNV GL, random wave, 3-100 Hz, 2.5 hr per axis
Safety: UL 60950-1
Green Product: RoHS, cRoHS, WEEE
Anti-Shock: 50g/11ms ±X, ±Y, ±Z, 3 shocks each axis w/ CFast, SD
Hazardous Location: Class 1 Division 2, ATEX/IECEx Zone 2
EMI: CISPR 32, FCC Part 15B Class A
EMS: IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV, IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m, IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV, IEC 61000-4-5 Surge: Power: 1 kV; Signal: 1 kV, IEC 61000-4-6 CS: 10 V, IEC 61000-4-8
Mounting: DIN rail, wall (DNV)
