• Moxa-ICF-1150I-S-ST-ManuAuto
1 1

Moxa

MOXA ICF-1150I-S-ST SERIAL TO FIBER CONVERTER

MOXA ICF-1150I-S-ST SERIAL TO FIBER CONVERTER

$1,102.00 CAD
$1,102.00 CAD
Sale Sold out

Features and Benefits

  • RS-232/422/485 to fiber optic converter
  • Single-mode fiber with ST connector for reliable communication
  • Extends communication distance up to 40 km
  • Supports baud rates up to 921.6 kbps for fast data transmission
  • 2.5 kV optical isolation for enhanced protection
  • Integrated surge protection for reliable operation
  • Automatic baud rate detection for simplified setup
  • Wide operating temperature range: -40 to 75°C
  • DIN-rail mounting for easy installation
View full details

Description

MOXA ICF-1150 Series Introduction
The ICF-1150 serial-to-fiber converters transfer RS-232/RS-422/RS-485 signals to optical fiber ports to enhance transmission distance. When an ICF-1150 device receives data from any serial port, it sends the data through the optical fiber ports. These products not only support single-mode and multi-mode fiber for different transmission distances, but models with isolation protection are also available to enhance noise immunity. The ICF1150 products feature Three-Way Communication and a Rotary Switch for setting the pull high/low resistor for onsite installation.

You can also find the ICF-1150I-M-SC-T, ICF-1150I-S-SC-T, and ICF-1150I-S-ST models in the ICF-1150 Series.

Data sheet

Specification

CONVERTER:Converter specifications
Data transfer speed:0.05Kbps to 921.6Kbps
Maximum data transmission distance:5Km
Minimum output power converter:-5dBm
Sensitivity to receiving information:-20dBm
Wavelength:850nm
CONVERTER:Power Requirements
Maximum power consumption:-
Power Consumption (Output Adapter):12V DC, 0.127A to 48V DC
Power Input Plugin (Redundant):No
CONVERTER:Standards and protocols
Point-to-point topology:Half-duplex or full-duplex
Ring topology:Half-duplex
RS-232 Signals:TxD, RxD, GND
RS-422 Signals:TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Signals:Data+, Data-, GND
CONVERTER:Interface
10/100Mb RJ45 (Megabit) Ports:No
100Mb Fiber optic single mode (Megabit) Ports:No
10/100/1000Mb (Gigabit) POE Ports:No
100Mb Fiber optic multi mode (Megabit) Ports:Yes:1 ST Port
10/100/1000Mb RJ45 (Gigabit) Ports:No
1000Mb SFP Fiber optic (Gigabit) Ports:No
100Mb SFP Fiber optic (Megabit) Ports:No
Number of 10/100Mb PoE port:No
USB:No
DSL:No
Serial port:Yes:2 RS-232/422/485 Ports
Othe
CONVERTER:General
Fan / Fanless:No
MTBF:792,085 hour
Require cable diameter:50/125μm, 62.5/125μm, 100/140μm
CONVERTER:Physical Characteristics
Dimensions:30.3x70x115mm
Housing:Metal
Installation:Din-rail
Isolation:No
Operating Temperature:0 to 60°C
Operation Humidity:5% to 95% non-condensing
Protection against excessive consumption:Yes:1.1A
Protection against reverse flow:Yes
Standards and Certifications:Safety: UL 508; Hazardous Location: UL/cULS Class I Division 2 Groups A/B/C/D, ATEX, Zone 2 EEx nC IIC, IECEx; EMC: EN 55032/24; EMI: CISPR 32, FCC Part 15B Class B; EMS: EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV, EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m, EN 61000-4-4 (EFT): Power: 4 kV; Signal: 2 kV, EN 61000-4-5 (Surge): Power: 4 kV; Signal: 0.5 kV, EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m, EN 61000-4-8 (PFMF); Green Product: RoHS, CRoHS, WEEE; Freefall: IEC 60068-2-32; Water and Dust Proof: IP30
Storage Temperature:-40 to 85°C
Weight:0.33Kg

CONVERTER:LED Indicators
LED Per Port:No
Power:Yes

CONVERTER:Package Checklist
Hardware installation guide:Yes
Power adapter:No
Power cable:No